Best answer: Can you put oil on skateboard bearings?

We recommend using a skate-specific bearing lubricant like Bones Speed Cream or Bronson Speed Co. High Speed Ceramic Oil. Drip 1-2 drops of lube into the bearing, then spin it to evenly distribute the oil. Repeat for all eight bearings.

What can I use to lubricate skateboard bearings?

It’s important to use a silicone-based lubricant. WD40 or others like it will dry out your bearings and attract dust and dirt. You can pick up a bottle of Bones Speed Cream at the skate shop, or try some Prolong from the auto parts store.

Is oil bad for skateboard bearings?

Grease up the bearings

After drying the bearings thoroughly, they should be greased up. A few lubricants that function admirably for skateboard bearings are sewing machine oils, skate bearing grease, or electronic oils.

Can you use cooking oil on skateboard bearings?

In a pinch, motor oil or even cooking oil will work. Wd-40 is a solvent, not a lubricant. Solvents will wear away at the plastic pieces inside the bearing that make the bearing work, and will limit the life of your bearings. Olive oil is not good, but is better than nothing, and is probably better than using a solvent.

Can you use Vaseline on bearings?

You can, but it won’t hold up like bearing grease will. …

IT IS INTERESTING:  Where do mountains occur?

Can I use WD-40 on my skateboard bearings?

Can you use WD40 on skateboard bearings? NO. WD40 is a degreaser – not a grease!! The object of cleaning your bearings is to remove all the grease, clean the bearings, then add grase back in.

Can I use 3in1 oil for bearings?

Not advisable. 3 in 1 oil isn’t really oil, it’s a lubricating solution that has oil in it, among other things such as corrosion protection and rust prevention. None of which has anything to do with lubricating motor bearings. Much, much better to simply use any good lubricating oil.

Can I use baby oil on my bearings?

So what I did is I took the bearings out put some baby oil in a Syringe, put it in the bearings spin them a bit and it works like any other lubricant it worked pretty well for me so if you have a walmart board or something it sure works better than wd40.

How do you choose lubricant for bearings?

Selection of the appropriate oil or grease to lubricate a certain bearing application mainly means the selection of the proper oil (or grease base oil) viscosity so that the oil forms the elastohydrodynamic lubricant film between rolling elements and raceways able to withstand the bearing loads.

Lifestyle Extreme