A rudder blade deflects water in a particular direction, causing the boat to turn; a skeg creates resistance to the turning affect caused by the wind and causes the boat to go straight. In both cases, the devices are being used to make a boat track straight when the wind is trying to make the boat turn.
Why use a skeg on a kayak?
Skegs are used only to assist in the tracking of a kayak.
In cross winds and following waves, you can deploy a skeg to help your kayak track straight. When the skeg is no longer needed, it can be raised back up inside the boat and has no effect on the performance of the kayak.
How important is a rudder on a kayak?
A rudder gives you the ability to ‘crab’ to the wind, meaning that you turn the rudder to counter the winds push on the kayak. This allows you to paddle with normal strokes versus multiple strokes on one side of the kayak to correct for the wind thereby allowing you to maintain your momentum, making you more efficient.
Does a bent skeg affect performance?
The problem with running a bent skeg is that it may be altering the trim so that your motor is going to steer right or left and there is more turbulence. This affects performance to some extent. Rather than cut it off, take a rubber mallet and start pounding on the side.
Can you replace a skeg?
Easily repair a broken skeg on your outboard or sterndrive. … Whether caused by running aground or due to some land-bound calamity, a broken or damaged skeg adversely affects handling. In some cases, a welder can repair your skeg.
Do skeg guards affect performance?
Chips or even chunks out of the skeg guard won’t really affect your performance. It really functions to protect your prop and drive from damage by absorbing the impact. You likely have some other factor that is affecting your drift.
Which way is the front of the kayak?
Bow: Simply put the bow is the front of the kayak. This is universal for all boats. So, whether you sit in a motorboat, canoe, and every other type of kayak, the word “bow” means the front.