Bearings are a very important part of your longboard as they are what connect the wheels to the trucks and make the wheels spin round and round. As they wear down, the wheels will have more resistance and it will get harder and harder for them to spin. Longboard bearings should be replaced at least every 1 to 2 years.
How often should you replace skateboard bearings?
How often should you replace your bearings? If you use high quality bearings, you should replace them once a year or two. You might also want to consider changing your bearings if you want an upgrade in speed, if you break your bearings or your current ones start to slow down.
How often should you lube skateboard bearings?
When: Depends on several factors, but usually every 1-3 months. Why? Skate bearings help your wheels roll freely, but the more you skate, the more debris gets stuck in the bearings and causes friction—the opposite of what you want! Cleaning your bearings removes dirt and grime and keeps you rolling smoothly.
How long should a bearing last?
How long does a wheel bearing last? Wheel bearings have an average lifespan of 136,000 to 160,000 km (approximately 85,000 to 100,000 miles). This is only a rule of thumb though, the actual lifespan of a wheel bearing depends on the quality of the wheel bearing and the operating conditions.
How do you know when to clean your bearings?
Remember, bearings only need to be cleaned about once every two to three months depending on the environment you are skating in. If you primarily skate inside several times a month but the surface is not cleaned often, you might have to shine up your bearings once a month.
Can you use WD40 on skateboard bearings?
Can you use WD40 on skateboard bearings? NO. WD40 is a degreaser – not a grease!! The object of cleaning your bearings is to remove all the grease, clean the bearings, then add grase back in.
Why are bearings so expensive?
The part is more expensive because it’s an integrated bearing and hub with a higher quality seal and grease to allow it to last so long. This could be anywhere from $40–200 for the part alone. Usually between $50–100 for average passenger cars.
How often should bearings be replaced?
Most serviceable wheel bearings need maintenance every 25,000 to 30,000 miles, or during every brake service. But, the average life of a sealed wheel bearing and hub assembly is about 85,000 to 100,000 miles, without the opportunity for a technician to repack the bearings.
What household items can you use to lube bearings?
If you don’t have a skate bearing lubricant at home, you can use either sewing machine oil or oil for electronic gadgets. Don’t use motor oil, WD-40, petroleum jelly, or cooking oil because they’re unsuitable for bearings. Also, be careful of the amount of oil you’ll be putting on each bearing.
Can you use rubbing alcohol to clean bearings?
Put the bearings in a container WITH A LID and fill it to the brim with isopropyl alcohol. Cap the container and shake for 5 minutes. … Set the bearings out to dry. While you’re waiting for the alcohol to fully evaporate, you can take the time to clean the bearing covers with some paper towels.