If you’re used to skating tight trucks, loosening them can improve the flow of your skateboarding. Without having to tic-tac up to an obstacle or lean drastically as you roll away, your skating will take on an easier, more care-free look. If your style seems rigid, try loosening your trucks.
How tight should your skateboard be?
The most suitable tightening scale for an average person should be between 5 to 7. This means trucks should be in the middle of tight and loose. It will simply allow you to bounce-jump the skateboard effortlessly as well as give you a stable landing on the board after flipping.
Why is my skateboard so Wiggly?
Speed wobbles occur when the board begins to involuntarily oscillate in short mini “S” turns. This typically happens when too much weight is placed on your back leg. While speed wobbles usually occur at higher speeds, you can also wobble at low speeds by distributing your weight in the wrong way.
Is it better to have loose or tight trucks?
Tight trucks are better for the ancles, it will prevent future injuries, and if you have one a board with tight trucks will help you to get back sooner than you think. On the other hand, loose trucks won’t make it difficult to line up on an obstacle.
Why does my skateboard turn when I push?
If your skateboard is constantly turning or leaning towards the left or the right, there are a couple of possible causes. The most likely ones are either the bushings in your trucks, or your hardware. Bushings are the hard, rounded plastic pieces in your trucks that squash down in the direction you are turning.
Should skateboard wheels be tight or loose?
Your skateboard wheels should be tight enough that they spin freely. However, you don’t want the wheels so loose that they wiggle on the truck’s axle. To see if you need to tighten your wheels, put the board on its side, and flick the wheel as fast and as hard as you can with one hand.
What size board does Tony Hawk Ride?
The standard recommended size for the skateboard is 7.5 inches wide while the length should be in between 28″ – 32″.
How long is a 8.0 skateboard?
NOTE TO BEGINNERS: Unless you are sure you want a wide board with a long wheelbase, start off with a standard deck of 8.0″ to 8.38″ in width, and about 32″ in length. This is a much more common size, and probably a better starting point.