Quick Answer: What does loosening your skateboard wheels do?

There is nothing wrong with riding this way if that is your preference, just know you are likely costing yourself some landed tricks. Loose trucks allow a skater to land a trick with the board slightly off from the line of travel. A slight lean and the board will straighten up and compensate for the error.

Why do skateboards squeak?

When you hear your board squeaking, it is usually the rubbers in the truck that are too dry. The hanger of your trucks turns in the pivot cup and that makes the noise. It is also possible that the bushings are too dry.

Should I use WD40 on my skateboard?

It’s important to use a silicone-based lubricant. WD40 or others like it will dry out your bearings and attract dust and dirt. … It doesn’t take much, and the excess will just spin out when you replace your shields, pop your bearings back in your wheels and start shredding. Skate safe and enjoy your new-found speed.”

Why does my skateboard slow down so fast?

One of the most frequent issues that produce a slow skateboard is over-tightened axle nuts. How tight should skateboard wheels be? Over-tightening axle nuts causes pressure against bearings, not allowing wheels to spin. … With your hand, move wheel side to side to, listen for clicking noise.

IT IS INTERESTING:  How do I sign up for UHC rally?

How do you get used to a loose truck?

If you want loose trucks, super glue the nut down or try to find soft bushings or something that will allow you to get your trucks looser. Or you can shave new bushings down, take off new bushings and rub them on the cement and kind of shave off the edges and that helps too.

Is it better to have loose or tight trucks?

Tight trucks are better for the ancles, it will prevent future injuries, and if you have one a board with tight trucks will help you to get back sooner than you think. On the other hand, loose trucks won’t make it difficult to line up on an obstacle.

How do I make my skateboard slower?

The best way to slow down on a downhill skateboard, is to have harder wheels. It may sound odd, but having harder wheels allows you to slide out the back end of your board, almost like a snowboard.

Lifestyle Extreme