Your skateboard wheels should be tight enough that they spin freely. However, you don’t want the wheels so loose that they wiggle on the truck’s axle. … If the wheel stops spinning after a few seconds, you’ll want to loosen them.
Is skateboard supposed to be loose?
Some people like they’re trucks really tight and some like them really loose there really isn’t a gauge set of rules with that . For flip tricks, they should be pretty tight as to provide stability. For cruising, they should be pretty loose, and for vert you’d want them to be somewhere in the middle.
How do you tell if your skate wheels are too loose?
A good test for roller skate wheels tightness is to spin each wheel with your finger, if the wheel stops before you can count 8 seconds, they are too tight. If the wheel stops after counting to eight, make sure the wheel doesn’t wiggle side to side.
Is it better to have loose or tight trucks?
Tight trucks are better for the ancles, it will prevent future injuries, and if you have one a board with tight trucks will help you to get back sooner than you think. On the other hand, loose trucks won’t make it difficult to line up on an obstacle.
Why do I have to push so much on my skateboard?
Bad quality wheels are made way to soft. This causes a certain amount of squishing to the wheels once you stand on the skateboard and put pressure on the wheels.
Should I tighten my roller skate wheels?
We do not suggest tightening your axle nuts, as they can easily be overtightened and damage the bearings, causing them to fail. We recommend replacing your bearings with Slow Roll substitute bearings, which will slow down your wheels while you learn to skate.
Are Loose trucks better for beginners?
Loose trucks are easy to turn and maintain adequate flow while riding. … Note: Tight trucks sometimes become risky because turning at high speed is not easy suddenly when you need to avoid something. I will recommend for beginners to keep it regular, not too tight or too loose.