Quick Answer: Should you clean your skateboard trucks?

Make sure to clean your bearings every season and check your trucks and deck for cracks occasionally. Keep your skateboard out of the rain and don’t leave it outside.

Do you need to grease skateboard trucks?

A good lithium grease is almost always a better option, but if the squeaking is coming from the pivot cup (which is usually the most common source of squeaks, especially on new trucks), a small amount of dish soap/washing up liquid in there can also do the trick.

Does water ruin skateboard trucks?

Water can cause your deck bolts to rust, it can also cause your trucks (particularly the axles) to rust, and most notably it can cause your bearings to rust and bring in extra grime. … If they are just dirty, you can clean them, but if they are starting to rust its permanent damage.

How can I make my skateboard last longer?

Here are some tips to take care of your skateboard decks and make them last longer:

  1. Keep it DRY! Nothing will ruin a skateboard faster than getting it wet. …
  2. Do not throw your board. …
  3. Try not to leave it in the car. …
  4. Do not skid on the tail. …
  5. If it breaks, try to fix it!
IT IS INTERESTING:  How many people play paintball in the world?

Is it OK to put WD40 on skateboard trucks?

It’s important to use a silicone-based lubricant. WD40 or others like it will dry out your bearings and attract dust and dirt. … It doesn’t take much, and the excess will just spin out when you replace your shields, pop your bearings back in your wheels and start shredding. Skate safe and enjoy your new-found speed.”

Why do skateboards squeak?

When you hear your board squeaking, it is usually the rubbers in the truck that are too dry. The hanger of your trucks turns in the pivot cup and that makes the noise. It is also possible that the bushings are too dry.

Is it OK to skate when it’s wet outside?

Skating in the rain or even just on damp ground can affect your bearings and reduce their efficiency. After a wet skate it’s important to clean your bearings to ensure no permanent damage is done.

What do you do if you drop your skateboard in water?

If your board gets wet, immediately get it away from the water source. Let it sun-dry if possible. If it was out in sprinkling rain for 10 minutes, you’ll be fine. If it was out in a storm for several hours it will almost certainly be waterlogged and you should look into getting a new deck.

What are the worst skateboard brands?

The 10 Worst Skateboarding Brands

  • Walmart. These are the worst boards ever. …
  • World Industries. Get real with these top ten lists. …
  • Kryptonics. I don’t understand why these are so high on the list. …
  • Element. I don’t get why old-reliable is up this high. …
  • Mongoose. …
  • Zoo York. …
  • Converse. …
  • Airwalk.
IT IS INTERESTING:  Best answer: Do you shift a snowmobile?

Why Walmart skateboards are bad?

Walmart skateboards are bad because they use cheap material. Also like any cheap skateboard, it’s a lot harder to learn skateboarding not to mention it can be very frustrating and demotivating. Other than poor performance, they can be unsafe. Wheels can come flying off and trucks can break.

Lifestyle Extreme